Skip to main content

Twin Anniversaries for the Microbus

[See image gallery at www.vwvortex.com]

On March 8, 1950 production on the VW Microbus began and on this same day, six years later, their Hanover factory opened. The factory took over production of the Microbus and was hailed as a marvel of modern production.

As reported elsewhere on the site, VW is celebrating the opening of their Hanover plant with a special retrospective dedicated to the Microbus.

The idea for the world famous van began, like so many other vehicles, with a one-off special edition. Called the Plattenwagen, the vehicle was commissioned by Major Ivan Hirst—the British officer put in charge of re-commissioning the VW factory after the war. That truck was simply designed to be a flatbed, used to move parts around the factory.

In 1947, a Dutch VW importer called Ben Pon saw the Plattenwagen and sketched out what would later become the Type 2, or Microbus.

The Type 2 was based off of a Beetle (the Type 1), and used the same 25 HP engine and much of the same architecture, which presented the design team with a number of challenges. The frame needed to be strengthened, and the body reshaped to help it cut through the air.

The result was a stroke of packaging genius and the Type 2 became hugely successful. The Microbus would continue production largely unchanged until 1979. VW stuck with the rear-engined van idea until 1990, when finally, the front-engined, water cooled T4 took over as the brand’s van.

The Microbus, though, goes down as one of VW’s best-loved designs and to this day VW has been trying to recapture the magic of the original. Just this year, VW announced the BUDD-e (a play on one of the Microbus’s other nicknames, “Bulli”), an all-electric concept vehicle.

Below is a timeline of the Microbus through the years.

 

The post Twin Anniversaries for the Microbus appeared first on VWVortex.



from VWVortex http://ift.tt/22062je
via IFTTT
Labels:

Comments

Post a Comment

Popular posts from this blog

Waterfest Moves to Atco Dragway

Waterfest 24 will be held at Atco Dragway, in Atco, New Jersey. The summer event will take place at its new venue on July 21 and 22. Long held in Englishtown, New Jersey, the festival has been such a large part of the VW scene that the latest iteration of the Golf even comes with optional “Englishtown” wheels . The new venue, however, is an NHRA drag track a scant 52 miles southwest of Englishtown. The ¼ mile drag track opened in 1960, which makes it the oldest drag strip in New Jersey. The announcement came today on a social media post that announced the new location. Waterfest is North America’s largest VW/Audi show. As many 20,000 people show up for the annual show, making the second largest show in the world—with Worthersee being number one. 2018 will be Waterfest’s 24 th year in existence. The post Waterfest Moves to Atco Dragway appeared first on VWVortex . from VWVortex http://ift.tt/2GQjkuc via IFTTT
Post a Comment
Read more

Macau Gets Messy with 16-Car Pileup

The Macau Grand Prix is always good for an accident or two or 16— you may remember Audi’s race ending crash last year —and this year’s event didn’t disappoint. It didn’t take long for things to get messy on the tight road circuit. On the opening lap of the qualifying race a 16-car pileup caused the race to be suspended. Things kicked off when Daniel Juncadella hit a wall on the exit of Police bend, one of the tightest parts of the already tight circuit. The following car of Raffaele Marciello was able to avoid the carnage, but Laurens Vanthoor, who was in the upside-down Audi that ended the race last year, could not avoid Juncadella and together they blocked up the road pretty much completely. “I couldn’t see him [Juncadella] at first. Then I saw the car standing still,” Vanthoor told Motorsport. “I tried to brake but it was just understeering and I couldn’t do anything. There’s room for one car there and you’re blind.” Fourteen more cars would eventually crash into the corner c
Post a Comment
Read more

The First of its Kind: Integrated Engineering Releases Highly-Anticipated IE450T MK6 Golf R Turbo Kit

After two long years of development, the team at Integrated Engineering has finally announced the release of their IE450T kit for the MK6 Golf R. With their turbo kit bolted on right out of the box, the sport AWD hatch is transformed into a 450bhp monster, with hardly any noticeable increase in spool time. In fact, 435 ft-lbs of torque are achieved at all four wheels, at a mere 3300rpm! By now you are probably asking yourself how this is even possible on a 2.0L engine that made nearly half that power from the factory. By employing true twin-scroll technology into the cast turbo manifold and pairing it with a state-of-the-art BorgWarner EFR turbocharger, IE was able to keep spool time at a minimum and bring the fastest-spooling big turbo setup to the market. “We wanted to offer a kit that would dramatically increase the power output without making the car lose its amazing street-friendly drivability,” mentioned one of the IE engineers. We are told the IE450T leaves the car driving jus
Post a Comment
Read more