Skip to main content

8 Useful Tips and Hacks for Spring Car Cleaning

Spring is super busy for most folks. You probably already have a to-do list that’s ready to burst like a vigorously shaken soft drink.

Getting your trusty ride looking lustrous and gleaming but without spending lot of time or cash is probably an item on that long to-do list. Winter is finally over, and now is your car’s time to shine.

Below is a list of simple tips and hacks to help you get your ride ready for spring, as quickly, effectively and inexpensively as possible.


1. Use Dish Soap (But Not on Your Paint)

A quality dish soap, diluted heavily in water, is the best interior, plastic, and glass cleaner you’ll ever use. A bottle of name-brand dish soap costs $4, amounts to a lifetime supply, and cleans just about everything inside of your ride. Dilute three or four drops of a quality dish soap into a small pail or bowl of warm water, and keep the suds to a minimum. Then dunk your rag, wring it out and get wiping. Just remember — don’t use dish soap on your exterior paint, since dish soap thinks the wax and clearcoat on your ride’s paint is baked-on lasagna and will try to strip it off.

afwasmiddel_una_aldi


2. Use a Foam Cannon, Because Those are Neat

Have you heard? A large cannon that spouts fluffy soap suds all over your car is a thing that now exists — and you should use one. It makes lathering faster and more effective, protects your paint while washing, and looks downright cool, since it’s a big-ass cannon that shoots foam.

Best of all, ensuring your ride is totally covered in foam lather before you start washing it is a great way to indirectly prolong the life of its finish.

Chris Minor is the owner of Refined Shine detailing in Lively, Ontario. “The worst thing you can do to your paint is to touch it, and with a foam cannon, you’re pre-soaking your car with soap suds, which has lots of benefits,” he says. “It breaks down dirt and grime, but also offers full lubrication for the washing process, which can minimize swirls. It also looks cool!”

Best of all, with a foam cannon, you’ll save time, too.


3. Spray Wax / Detailer

Giving your car a full wax job when you don’t have a free afternoon is just the worst, but treating your paint to a coat of spray wax or spray detailer looks and functions just as well, and only adds about two minutes of work, since you spray it on while drying your ride. Lightly mist the spray wax (it’s a solution of wax droplets suspended in a liquid) over your ride’s still-wet paint, one panel at a time, while you work in the shade. Then, dry with a towel or chamois, and use a clean microfiber towel to buff any streaks off, to a perfect, water-repelling shine. You can even use a spray wax or spray detailer between washes, to shine up a lightly dirty ride, sans hose — meaning you’ll save time and money.


4. Orbital Buffer Carpet Cleaning

dual-action-carpet-upholstery-brush-1

Get the upholstery attachment, and your orbital buffer makes a kickass carpet cleaner that’ll scrub a winter’s worth of salt stains and coffee spills clean out of your filthy rugs, lickety-split. Read the instructions — and use this attachment with the correct cleaning solution and speed setting. You’ll be able to power-scrub your carpeting to kingdom come, with minimal elbow grease, and minimal time, which basically makes you a genius.


5. Use Two Pails

This tip won’t help you wash your ride any faster, but it will help protect your paint finish. Fill one pail with clean water and use it to rinse your sponge off between trips to the soap pail. Frequent rinsing of your sponge or wash mitt with clean water before dunking it into your soap pail means you won’t be scrubbing contaminants into your paint. And remember — never use the same wash mitt, brush or sponge on your paint as you use to clean your wheels, as this can allow abrasive brake dust particles to come in contact with your paint while you wash.


6. WD40 is a Great Wheel Polish

WD40 is a popular miracle liquid that can be used for just about anything — including a great chrome or alloy wheel polish. It’s cheap, highly effective, and you probably have some in your garage right now. Just spray a little onto a rag, wipe it over your wheels, and buff clean as needed with another clean rag or cloth. The WD40 leaves a lustrous shine behind, as well as a layer of protection. Best of all, it melts through grime and brake dust like a plasma cutter through tinfoil. Just be sure not to spray WD40 directly onto your wheels, as you definitely don’t want any to get in contact with your brakes.


7. Windshield Cleaning Lever

windsheild-wand-679x679

Cleaning the inside of your car’s windshield seems like it should be easy, but usually, it’s a total pain. Do you like contorting yourself like a Russian gymnast and swearing a lot? We didn’t think so. Try a windshield cleaning lever instead. It’s a hinged cleaning pad mounted to an arm, allowing you to clean cigarette smoke residue, smudges, and sneeze particles right to the very edge of your windshield — and all with just one hand, no twisting, and minimal effort. Just spray a little window cleaner on the washable pad, and get to work.


8. Emzone Odor Stop

Does your car smell like the inside of your dog’s kennel? The bottom of your gym bag? A half-eaten box of fries? A little of each? After giving your ride a good cleaning and vacuum, consider using a canister of Emzone Odor Stop. You pull the tab, press the nozzle, and toss this odor-eating hand-grenade into your ride, letting it sit for 10 minutes with the AC cranked. Miraculous vapors course through every part of your ride’s cabin and climate control system, nuking bad smells. In just a few minutes, your ride will smell like delicious DQ soft-serve, not socks. One canister equals one treatment, and the cost is typically $10 or less.

This article first appeared on Auto Guide

The post 8 Useful Tips and Hacks for Spring Car Cleaning appeared first on VWVortex.



from VWVortex http://ift.tt/2oMBNxK
via IFTTT

Comments

Popular posts from this blog

Waterfest Moves to Atco Dragway

Waterfest 24 will be held at Atco Dragway, in Atco, New Jersey. The summer event will take place at its new venue on July 21 and 22. Long held in Englishtown, New Jersey, the festival has been such a large part of the VW scene that the latest iteration of the Golf even comes with optional “Englishtown” wheels . The new venue, however, is an NHRA drag track a scant 52 miles southwest of Englishtown. The ¼ mile drag track opened in 1960, which makes it the oldest drag strip in New Jersey. The announcement came today on a social media post that announced the new location. Waterfest is North America’s largest VW/Audi show. As many 20,000 people show up for the annual show, making the second largest show in the world—with Worthersee being number one. 2018 will be Waterfest’s 24 th year in existence. The post Waterfest Moves to Atco Dragway appeared first on VWVortex . from VWVortex http://ift.tt/2GQjkuc via IFTTT

Macau Gets Messy with 16-Car Pileup

The Macau Grand Prix is always good for an accident or two or 16— you may remember Audi’s race ending crash last year —and this year’s event didn’t disappoint. It didn’t take long for things to get messy on the tight road circuit. On the opening lap of the qualifying race a 16-car pileup caused the race to be suspended. Things kicked off when Daniel Juncadella hit a wall on the exit of Police bend, one of the tightest parts of the already tight circuit. The following car of Raffaele Marciello was able to avoid the carnage, but Laurens Vanthoor, who was in the upside-down Audi that ended the race last year, could not avoid Juncadella and together they blocked up the road pretty much completely. “I couldn’t see him [Juncadella] at first. Then I saw the car standing still,” Vanthoor told Motorsport. “I tried to brake but it was just understeering and I couldn’t do anything. There’s room for one car there and you’re blind.” Fourteen more cars would eventually crash into the corner c

The First of its Kind: Integrated Engineering Releases Highly-Anticipated IE450T MK6 Golf R Turbo Kit

After two long years of development, the team at Integrated Engineering has finally announced the release of their IE450T kit for the MK6 Golf R. With their turbo kit bolted on right out of the box, the sport AWD hatch is transformed into a 450bhp monster, with hardly any noticeable increase in spool time. In fact, 435 ft-lbs of torque are achieved at all four wheels, at a mere 3300rpm! By now you are probably asking yourself how this is even possible on a 2.0L engine that made nearly half that power from the factory. By employing true twin-scroll technology into the cast turbo manifold and pairing it with a state-of-the-art BorgWarner EFR turbocharger, IE was able to keep spool time at a minimum and bring the fastest-spooling big turbo setup to the market. “We wanted to offer a kit that would dramatically increase the power output without making the car lose its amazing street-friendly drivability,” mentioned one of the IE engineers. We are told the IE450T leaves the car driving jus